Fujitsu D1522, D1521 technical manual Logo Boot DeskView / DeskViewOEM, Recovery Bios

Mainboard D1522 / D1521

Logo Boot

A customer-specific logo can be displayed during system booting. The logo is loaded using the LogoFlash tool. The logo can have a size of 640 x 480 pixels with 16 colours. The tool is provided on the CD "Drivers & Utilities" or "Drivers & Utilities enhanced" or is available on the Internet at http://www.fujitsu-siemens.com/mainboards.

DeskView / DeskViewOEM

The network-capable manageability software DeskView/DeskViewOEM* mainly consists of three modules:

•DeskInfo shows the most important device data of the PCs in a network (local and/or on an administrator PC).

•DeskAlert monitors the operability of all major components and triggers alarms if necessary depending on the mainboard variant.

•DeskFlash carries out a BIOS update under Windows.

Recovery BIOS

If an error occurs during a BIOS update (e.g. due to a power failure), the system BIOS will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions are provided in the chapter "BIOS Recovery - Recovering System BIOS".

IA-PC

Instantly Available PC ensures fast availability of the PC from an energy-saving mode. Within just a few seconds the PC is in exactly the same state it was in when it was switched off without time-consuming booting. Depending on the operating system, the PC can be switched into an energy-saving mode with applications open by pressing the ON/OFF switch.

A26361-D1522-Z120-3-6319 English - 5