Fujitsu ECONEL30 System configurator and order-information guide, PRIMERGY Econel30, Section

C

System configurator and order-information guide

PRIMERGY Econel30 Status 2003-10-28

Section VII

SCSI Controller

There are 7 slots (max. 340 mm): 1x AGP (ocuppied by AGP graphics card), 6x PCI long

A. SCSI Controller for backup drives

S26361-F2644-E3

SCSI Controller UW

with LSI Chip 53C1000R

1 channel LVD,

for internal backup drive max. 160MB/s; with cable

64/66 PCI, min 166mm, PCI standard profile

int: HD68 LVD, ext:

SW:

max. 1x per system

B. SCSI Controller for external peripheral devices

S26361-F2399-E1

SCSI 160 Controller

Adaptec SCSI Card 29160

1 channel: LVD + Fast/ Ultra (decoupl.) LVD connect. for HD, without cable Fast/Ultra connect. for acc. drives

64/66 (32/33) PCI, min 180 mm, hp

int: Fast 50 pins or Ultra HD68

+LVD HD68; ext: HD68(LVD) SW:

max. 1 per system

SCSI Controllers only for backup drives In SCSI Basic Units not necessary

Section VIII

Disk array

S26361-F2567-E2

IDE RAID Controller

Promise Fasttrak 100 LP

2-channel IDE RAID Controller max. 100MB/s, with cable

1 HD per channel max.

32/66 PCI, min. 180mm

int.: 2 x ATA 100 UDMA ext.:

SW:

max. 1x per system

In RAID-modus you need 2 IDE RAID Controller for the connection of 4 hard disk drives!

A second IDE RAID Controller can only later be ordered as -L part number. It may be mounted only after installation of the operating system.

IDE RAID Controller are only released for

IDE Basic Units!

D

Fujitsu Siemens Computers	8 of 11
Enterprise Products - PRIMERGY Server