Fujitsu fi-5750C manual 27

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

2.1 Turning the scanner ON/OFF

2.2 Setting the ADF

2.3 Loading documents onto the ADF

2.4 Scanning document using the Flatbed

2.5 Scanning documents

2.6 How to use the Scanner Driver

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6TROUBLESHOOTING

7ONLINE SETUP

8DOCUMENT SPECIFICATION OF ADF

9OPTIONS

10SCANNER SPECIFICATIONS Appendix

2.1 Turning the scanner ON/OFF (Continued from the previous page)

Power Save Mode

The Power Save mode keeps the scanner in a low-powered state if no operation is performed on the scanner for 15 minutes when it is ON. The scanner is automatically switched to the Power Save mode.

In the Power Save mode, the indication of the Function No. display on the operator panel goes out, while the green LED is kept lit.

To return the scanner from the Power Save mode, perform one of the following operations:

●Load documents on the ADF paper chute.

●Press any button on the operator panel.

●Execute a command from the scanner driver.

1 2

All Rights Reserved, Copyright (C) PFU LIMITED 2003