2.3 Loading documents onto the ADF (Continued from the previous page)

5. Adjust the stacker extension according to the document size and raise the stopper.

6. Adjust the position of the stacker.

The mount position of the stacker can be changed. The stacker is normally mounted on the Lower position. If you scan thin papers or curl papers, you will remount the stacker to the upper position.

Lower position

Upper position

ATTENTION

When the stacker is mounted on the upper position, the stacking capacity decreases (Around 100 sheets at 80g/m2).

1 2 3 4 5 6

All Rights Reserved, Copyright (C) PFU LIMITED 2003