1.3 Functions of the Operator Panel
The operator panel is located on the right side of the scanner. This panel is comprised of a Function Number display, four buttons, and a LED.
No. | Name | Function |
1 | Check LED | Lights when an error occurs. |
|
|
|
2 | Function Number Display | Indicates the function number and error status. |
|
|
|
3 | Function Button | Changes the Function activated by the Send to button (*). |
|
|
|
4 | Send to Button | |
|
| Resets an error. |
5 | Scan/Stop Button | |
|
| Resets an error. |
|
| Cancels ongoing scanning. |
|
|
|
6 | Power Button/LED | Turns the scanner ON and OFF. |
|
| Lights when the scanner is turned ON. |
|
|
|
*) About the settings on the launcher, refer to FUJITSU TWAIN32 scanner driver help, which is included in the
"Setup
Indications on the Function Number Display
Indication | Function |
8 Blinks only one time upon turning on the scanner.
PIndicates that the scanner has been turned ON and is being initialized.
0 Indicates that initialization will soon end.
1Indicates that initialization has ended successfully. This status is called "Ready Status."
JIndicates that a recoverable error occurred during scanning with the image scanner.
U "J" or "U" and an "error number" is displayed alternately.
When an error is indicated, press the [Scan] button or [Send to] button to return to the Ready Status ("1").
EIndicates that an abnormality (alarm) occurred in the image scanner during its
Finitialization or during scanning documents.
C"E", "F", "C", "H", "A", or "L" and an "alarm number" are displayed alternately. When
H | the alarm number is displayed, press the [Scan] button or [Send to] button to return |
A | to the Ready Status ("1"). |
LIf this alarm occurs, turn the power off and on again. If the alarm continues after turning the power on again, contact the dealer where you bought the scanner or an authorized FUJITSU scanner service provider.