fi-6130 / fi-6230 Image Scanner Operator's Guide

TROUBLESHOOTING

CONTENTS MAP

TOP

2.2 Loading Documents on the ADF for Scanning

HINT

Refer to Chapter "7 ADF AND PAPER SPECIFICATION" for information about the

required document sizes and paper quality for ensuring correct operation when scanning documents from the ADF.

1.Align the edges of the documents.

1)Confirm that all the documents have the same width.

2)Check the number of sheets in the document stack.

(For details, see Section "7.3 Maximum Document Loading Capacity.")

-A4/letter-size paper or smaller that makes a document stack of 5 mm or less

-Maximum 50 sheets at A4/letter, 20 lb, or 80 g/m2

2.Fan the documents as follows:

Select a stack of documents 5 mm or less high.

Hold the document with both hands and fan it out several times.

Turn the document by 90 degrees, and then fan it in the different orientation again.

3. Load the document on the ADF paper chute.

Set the documents face-down in the ADF paper chute (so that the side to be scanned faces towards the ADF paper chute).