Fujitsu FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354, Continued, 82 W × 48 D × 20 H mm

FTP-622MCL101/102/353/354 FTP-632MCL101/102/353/354

(Continued)

	Item		Specifications
Part number		FTP-622MCL101/102/353/354
	For head	24 VDC ±5% 1.1 (1.7A)
		(24V Rav1500Ω, 25% printing ratio)
Power	For printer motor	24VDC±5% 1A maximum
supply	For cutter motor	24VDC±5% 1A maximum
	For logic	5VDC±5% 0.5 A maximum
Dimensions	Printer Mechanism	82 (W) × 48 (D) × 20 (H) mm
	Mechanism with cutter	97 (W) × 57 (D) × 38(H) mm
	Interface board	131 (W) × 89 (D) × 24 (H) mm
Weight	Printer Mechanism	Approximately 81g
	Mechanism with cutter	Approximately 280g
Life	Head	Pulse durability: 1 × 108 pulse/dot (using Fujitsu Components' standard
		driving method)
		Wear resistance: 50 km (at	25% print ratio)
	Cutter	3x103 times minimum		5x105 times minimum
Environmental	Operating temperature	+5 to +40°C (Guarantee, but can operate between 0°C to +50°C)
conditions
	Operating humidity	20 to 85% RH (no condensation)
	Storage temperature	–20 to +60°C (excluding paper)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor
Detection	Paper out/Mark detect	By photointerrupter
	Head release	By slide switch
	2 color paper (blue/black)	PB770 (Mitsubishi paper)
	(red/black)	PB670 (Mitsubishi paper)
Recommended
	High sensitivity paper	TF50KS-E4 (Nippon paper)
thermal sensitive
paper	Standard paper	TF60KS-E (Nippon paper), FTP-020P0104 (58mm)
		PD150R (Oji paper), FTP-020P020P0701 (58mm)
	Medium term paper	TP60KS-F1 (Nippon paper),FTP-020P0102(58mm)
		PD170R (Oji paper)
		P220VBB-1 (Mitsubishi paper)
		PD160R-N (Oji paper)
	Long term paper	AFP-235 (Mitsubishi paper)
		TP50KJ-R (Nippon paper)
		HA220AA (Nippon paper)

3