Fujitsu FTP-622MCL302 manual FTP-622MCL301/302, Continued

FTP-622MCL301/302

(Continued)

	Item	Specifications
Part number		FTP-622MCL301/302
Interface		Centronics (ESC/POSTM), RS232C
		24VDC ± 5%, Voltage
		Current : average*2 ( ): Peak
	For head	0.87 (1.16) A (at 80 mm/s printing speed, 25% printing ratio)
		0.63 (1.16) A (at 50 mm/s printing speed, 25% printing ratio)
Power supply		0.58 (0.58) A (at 30 mm/s printing speed, 25% printing ratio)
	For motor	24VDC ± 5%, 1.0 A maximum
	For cutter	24VDC ± 5%, 1.0 A maximum
	For logic	5VDC ± 5%, 0.5 A maximum
Dimensions	Mechanism (cutter)	101 (W) × 70 (D) × 42 (H) mm (w/cutter)
	NOT	131 (W) × 89 (D) × 24 (H) mm
	Interface board
Weight (Mechanism+Cutter)		approximately 300 g (w/cutter)
		Pulse durability : 1 × 108 pulse/dot (using Fujitsu's standard
	Mechanism	driving method)
Expected life		Wear resistance: 50 km (at 25% printing ratio)
	Cutter	FOR
		3 × 105 cuts
	Operating temperature	0 to +50°C*3
Environmental	Operating humidity	20 to 85% RH (no condensation)
conditions	DESIGN· MITSUBISHI Paper Mills			: P220VBB-1,AFP-235
	Storage temperature	–20 to +60°C (excluding paper)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor (applied energy control, abnormal temperature detection)
Detection	Paper out/Mark detect	By photointerrupter
	Head-up	By microswitch
		For front insertion use (58 mm width)		: FTP-020PU001,FTP-020P0701
Recommended thermal sensitive paper		For rear insertion use (60 mm width)		: FTP-020P0020,FTP-020P0702
		*Recommended papers	NEW
		· Oji Paper		: PD150R,PD160R,PD170R
		· NIPPON Paper		: TF50KS-E,TF60KS-E,TF60KJ-R

*1: There may be exceptions.

*2: 24VDC, minimum head resistance.

*3: Guarantee: +5°C ~+40°C.

3