Fujitsu FTP-624DCL002, FTP-624DSL002, FTP-624MCL002 FTP-624MCL001/002/FTP-624DCL/DSL, Continued

FTP-624MCL001/002/FTP-624DCL/DSL

(Continued)

	Item	Specifications
	For head	Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
		Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on)
Power
	For motor	Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries)
supply
		Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC)
	For logic	Voltage: 5 VDC ± 5%
		Current: 0.2 A maximum
Dimensions	Mechanism	82 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter)
	Interface board	131 (W) × 89 (D) × 24 (H) mm
Weight (Mechanism)		Approximately 80 g
Expected life	Mechanism	Pulse durability: 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
		driving method)
		Wear resistance: 50 km (at 12.5% print ratio)
	Operating temperature	0 to +50°C*2
Environmental
	Operating humidity	20 to 85% RH (no condensation)
conditions
	Storage temperature	–20 to +60°C (excluding paper)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	By thermistor (applied energy control, abnormal temperature detection)
Detection	Paper out/Mark detect	By photointerrupter
	Head-up	By microswitch
		For front insertion use (58 mm width)	: FTP-020PU001, FTP-020PG021
		For rear insertion use (60 mm width)	: FTP-020P0020, FTP-020PG106
Recommended thermal sensitive paper		In Europe (58 mm width)	: FTP-021P0060-45
		· Oji Paper	: PD150R, PD160R, PD170R
		· NIPPON Paper	: TF50KS-E4,TF60KS-E,TF50KS-E
		· MITSUBISHI Paper Mills	: P220VBB-1, AFP-235

*1: There may be exceptions.

*2: Guarantee +5°C to +40°C.

3