Fujitsu FTP-627 Series manual FTP-627MCL Series, Part Numbers, Specifications, Design

FTP-627MCL Series

■PART NUMBERS

	Item		Part Number
			FTP-627MCL001 (front paper insertion without head open detection switch
Printer mechanism			FTP-627MCL002 (bottom paper insertion without head open detection switch
			FTP-627MCL003 (front paper insertion with head open detection switch and knob)
			FTP-627MCL004 (bottom paper insertion with head open detection switch)
Mechanism with cutter			FTP-627MCL303 #01 MCL003 with full cut cutter
			FTP-627MCL303 #02 MCL003 with partial cut cutter
LSI for driving			FTP-627CU101
		ANK only	FTP-627DSL011 (RS232C serial)
Interface			FTP-627DCL011 (Centronics)
Board		Kanji	FTP-627DSL112 (RS232C serial with flash),
		supported	FTP-627DCL111(Centronics)

■ SPECIFICATIONS

	Item			Specifications
NOT
Part number		FTP-627MCL001/002/003/004/303#01/303#02
Printing method		Thermal-line dot method
Dot structure		384 dots/line
Dot pitch (Horizontal)		0.125 mm (8 dots/mm)—Dot density
		FOR
Dot pitch (Vertical)		0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area		48 mm
Number of columns		ANK 32 columns/line (maximum 12x 24 dot font)
Paper width		58 mm	+0-1	NEW
Paper thickness		60 to 80 μ m (some paper in this range may not be used because of
		paper characteristics)
	DESIGN
Printing Speed		Maximum 60mm/sec. (480 dot line/sec.)
Character types		Alphanumeric, katakana:			159 types
		International and special characters:			195 types
		JIS Kanji level 1, level 2, non-Kanji
		(supported only by FTP-627DSL112, DCL111): about 6800 types
Character, dimensions (H×W), number of		12 × 24 dots, (1.5 × 3.0 mm), 32 columns: alphanumeric, katakana
columns		24 × 24 dots, (3.0 × 3.0 mm), 16 columns: alphanumeric, katakana, Kanji
		8 × 16 dots, (1.0 × 2.0 mm), 48 columns: alphanumeric, katakana
		16 × 16 dots, (2.0 × 2.0 mm), 24 columns: alphanumeric, katakana, Kanji

2