Fujitsu FTP-627MCL354 manual FTP-627MCL353/354, Specifications

FTP-627MCL353/354

■SPECIFICATIONS

	Item		Specification
Interface		Conforms to RS232C / Centronics
	For print head	24 VDC average current, 1.5A (2.2A peak)
		(print ratio: 25%, print speed: 100mm/sec. )
Power
	For motor	24 VDC ± 5%, 1A maximum
supply
	For cutter	5 VDC ± 5%, 1A maximum
	For logic	5 VDC ± 5%, 0.1 A maximum
Dimensions	Mechanism with cutter	83.5 x 43.0 x 26.4 mm (WxDxH)
Weight	Mechanism with cutter	Approximately 120g
		Pulse resistance: 50 million pulses/dot (under our standard
Life	Head	conditions); Abrasion resistance: paper traveling distance 50km
		(print ratio: 25% or less)
	Cutter	300,000 cuts
	Operating temperature*	0˚ C to 50˚ C
Operating	Operating humidity	20 to 85% RH (no condensation)
environment
	Storage temperature	-20˚ C to +60˚ C (paper not included)
	Storage humidity	5 to 95% RH (no condensation)
	Head temperature	Detected by thermistor
	detection
Detection
	Paper out/mark detection	Detected by photo-interrupter
function
	Platen release	Detected by sliding switch
		High Sensitive Paper	TF50KS-E4 (Nippon Paper)
		Standard paper:	TF60KS-E(Nippon Paper), FTP-
			020PU001 (58mm), PD105R (Oji Paper),
			FTP-020P0701 (58mm)
Recommended thermal sensitive paper		Medium Life Paper	TF60KS-F1, FTP-020P0102 (58mm),
			PD170R (Oji Paper), P220VBB-1
			Mitsubishi Paper)
		Long Life Paper	PD160R-N (Oji Paper), AFB-235
			(Mitsubishi Paper), TP50KJ-R (Nippon
			Paper), HA220AA (Nippon Paper)

*+5˚C to +40˚C printing density assurance rance.

3