Fujitsu FTP-627USL402 manual FTP-627USL401/402, n SPECIFICATIONS

FTP-627USL401/402

nSPECIFICATIONS

Item		Specification
Iterface		Conforms to USB/Serial
Power	For print head	24 VDC average current, 0.5A (0.9A peak)
supply		(print ratio: 12.5%, print speed 100mm/sec.)
	For motor	24 VDC ±5%, 0.9 A maximum
	For cutter	24 VDC ±5%, 1.1 A maximum
	For logic	4.75 to 5.25VDC, 0.5 A maximum
Dimensions	Mechanism and board	100 x 94 x 108 mm (WxDxH)
Weight	Mechanism and board	Approximately 310g
Life	Head	Pulse durability: 50 million pulses/dot (under our standard
	Cutter	conditions); Abrasion resistance: paper traveling distance
		50km (print ratio: 12.5% or less).
		500,000 cuts (20 cuts/minute)
MTBF	Mechanism	3,000 hours
	Circuit board	500,000 hours
Operating	Operating temperature*	0ºC to +50ºC
environment	Operating humidity	20 to 85% RH (no condensation)
	Storage temperature	-20ºC to +60ºC (paper not included)
	Storage humidity	5 to 95% RH (no condensation)
Detection	Head temperature detection	Detected by thermistor
function	Paper out/mark detection	Detected by photo-interruptor
	Platen release	Detected by sliding switch
Recommended thermal sensitive paper		High sensitive paper	TF50KS-E4 (Nippon paper)
		Standard paper	TF60KS-E (Nippon paper),
			FTP-020PU001 (58mm)
			PD105R (Oji paper)
			FTP-020P0701 (58mm)
		Medium life paper	TF60KS-F1 (Nippon paper)
			FTP-020P0102 (58mm)
			PD170R (Oji paper)
			P220VBB-1 (Mitsubishi paper)
		Long life paper	PD160R (Oji paper)
			AFP-235 (Mitsubishi paper)
			TP50KJ-R (Nippon paper)
			HA220AA (Nippon paper)

*+5˚C to +40˚C printing density assurance range.