Fujitsu FTP-628MCL103 manual FTP-628MCL101/103, Part Numbers, Specifications

FTP-628MCL101/103

■PART NUMBERS

	Item		Part Number
Printer mechanism			FTP-628MCL101 (2-inch wide paper: 58mm) without platen open detect switch
			FTP-628MCL103 (2-inch wide paper: 58mm) with platen open detect switch
LSI for driving			FTP-628CU301 (ANK only)
Interface		Parallel	FTP-628DCL300 (Centronics)
Board		Serial	FTP-628DSL305 (RS 232C)
Interface		Parallel	FTP-628Y202
Cables
		Serial	FTP-628Y302
Power		Head, motor,	FTP-628Y402
cable		logic

■ SPECIFICATIONS

Item	Specifications
Part number	FTP-628MCL101/103
Printing method	Thermal-line dot method
Dot structure	384 dots/line
Dot pitch (Horizontal)	0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)	0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area	48 mm
Number of columns	ANK 32 columns/line (maximum 12x 24 dot font)
Paper width	58 mm+0-1
Paper thickness	60 to 100 μ m (some paper in this range may not be used because of
	paper characteristics
Printing Speed	Maximum 60mm/sec. (480 dot line/sec.) at 8.5V
Character types	Alphanumeric, katakana:	159 types
	International and special characters:	195 types
	JIS Kanji level 1, level 2, non-Kanji
	(supported only when Kanji CG is mounted):	about 6800 types
Character, dimensions (H×W), number of	12 × 24 dots, (1.5 × 3.0mm), 32 columns: ANK
columns	24 × 24 dots, (3.0 × 3.0mm), 16 columns:
ANK, Kanji	8 × 16 dots, (1.0 × 2.0 mm), 48 columns: ANK
	16 × 16 dots, (2.0 × 2.0 mm), 24 columns:
	ANK, Kanji

2