Fujitsu FTP-638MCL103 manual FTP-638MCL101/103, Specifications, Paper out/mark detection

FTP-638MCL101/103

■SPECIFICATIONS

	Item	Specification
		FTP-638MCL101/103
Interface		Conforms to RS232C / Centronics
	For print head	4.2 VDC to 8.5 V, average current 1.37A (1.53) peak value
		Printing ratio: 12.5%, printing speed 50mm/sec., 7.2 V
Operating
	For motor	4.2 VDC to 8.5 V, 1 A maximum
Voltage
	For logic	2.7 to 5.25 VDC, 0.1 A maximum
Dimensions	Printer mechanism	92.3 x 33.0 x 15.5 mm (WxDxH)
	Interface board	69.3 x 52.0 x 15.0 mm (WxDxH)
Weight	Printer mechanism	Approximately 52g
	Interface board	Approximately 20g
		Pulse resistance: 100 million pulses/dot (under our
Head life		standard conditions). Abrasion resistance: paper traveling
		distance 50km (print ratio: 25% or less)
	Operating temperature*	0˚ C to +50˚ C
Operating	Operating humidity	20 to 85% RH (no condensation)
environment	Storage temperature	-20˚ C to +60˚ C (paper not included)
	Storage humidity	5 to 95% RH (no condensation)
Detection	Head temperature	Detected by thermistor
	detection
function
	Paper out/mark detection	Detected by photo-interrupter
		High sensitive paper:	TF50KS-E4 (Nippon Paper)
			TK50KS-E (Nippon Paper)
		Standard paper:	PD150R (Oji Paper)
			FTP-030P0701 (80mm)
			TK60KS-F1 (Nippon Paper)
Recommended thermal sensitive paper		Medium life storage paper:	PD170R (Oji Paper)
			AFP220VBB-1 (Mitsubishi)
			FTP-030P0102 (80mm)
			PD160R-N (Oji Paper)
		Long life storage paper:	AFP-235 (Mitsubishi Paper)
			TP50KJ-R (Nippon Paper)
			HA220AA (Nippon Paper)

*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)

3