Fujitsu FTP-639MCL103/383-R manual

FTP-639MCL103/383-R

(Continued)

Item		Specifications
Part number		FTP-639MCL103/105-R	FTP-639MCL383#01/#02-R
Power supply	For head	24 VDC ±5%, 1.9A (4A) (24V, 25% printing ratio)
	For printer motor	24 VDC ±5% 1A maximum
	For cutter motor	---	24 VDC ±5% 1A maximum
	For logic	5 VDC ±5% 0.2A maximum
Dimension	Printer mechanism	104.2 x 40.2 x 20.5mm	---
W x D x H
	Printer mechanism with cutter	---	112.5 x 70.3 x 37.4mm
	Interface board (DCL/DSL)	70 x 60 x 21.6mm
	Interface board (DSL100)	95 x 73.5 x 11.6mm
	Interface board (DSL300)	77 x 50 x 21.5mm
Weight	Printer mechanism	Approximately 125g	---
	Printer mechanism with cutter	---	Approximately 350g
	Interface board (std)	Approximately 25g
	Interface board (medium speed)	Approximately 45g
	Interface board (high speed)	Approximately 20g
Life	Head	Pulse durability: 100M pulse/dot (using Fujitsu's standard driving
		method)
		Wear resistance: 100km (at 12.5% print ratio)
	Cutter	---	1,00,000 cuts minimum
	Platen	5,000 times (open/close)
Environmental	Operating temperature	-10ºC to +60ºC (guarantee)	0ºC to +50ºC (guarantee)
conditions
	Operating humidity	20 to 85% RH (no condensation)
	Storage temperature	-40ºC to +70ºC	-20ºC to +60ºC
	Storage humidity	5 to 95% RH (no condensation)
Detection	Head temperature	By thermistor
	Paper out/Mark detect	By photointerruptor
	Head release	By slide switch
Recommended	High sensitive paper	TF50KS-E4 (Nippon paper)
thermal
	Standard paper	TF60KS-E2 (Nippon paper), FTP-030P0104 (80mm)
sensitive paper		PD150R (Oji paper), FTP-030P0701 (80mm)
	Medium life storage paper	TF60KS-F1 (Nippon paper), FTP-030P0102 (80mm)
		PD170R (Oji paper)
		P220VBB-1 (Mitsubishi paper)
		PD160R-N (Oji paper)
	Long life storage paper	AFP-235 (Mitsubishi paper)
		TP50KJ-R (Nippon paper)
		HA220AA (Nippon paper)