Fujitsu FTP-641MCL101/102 manual Designation, General Specifications, Continued

FTP-641MCL101/102

■ DESIGNATION

	Item	Part number
Printer mechanism	Front paper insertion type	FTP-641MCL101
	Rear paper insertion type (supports thick paper)	FTP-641MCL102
Interface board		FTP-621DCL002
	Micro Controller Unit	FTP-621CU102
LSI
		FTP-633GA101
	Gate Array

■GENERAL SPECIFICATIONS

	Item							Specifications
Printing method			Thermal-sensitive line dot method
Dot structure			832 dots/line
Dot pitch (Horizontal)			0.125 mm (8 dots/mm)—Dot density
Dot pitch (Vertical)			0.125 mm (8 dots/mm)—Line feed pitch
Effective printing area			104 mm
Number of columns			69 columns/line (maximum)—Alphanumeric KANA
Maximum printing speed			800 dotlines/s (100 mm/s) maximum
			JIS ANK			: 128		International characters : 130
Character types			Semi-graphic : 63					ASCII small characters : 31
			Download			: 384
Character composition, dimensions (H×W),			24	×	12 dots, (3.0 × 1.5 mm), 69 columns
			32	×	16 dots, (4.0 × 2.0 mm), 52 columns
Number of columns (standard)			24	×	24 dots, (3.0 × 3.0 mm), 34 columns
			32	×	32 dots, (4.0 × 4.0 mm), 26 columns
Interface			1) Centronics standard					2) Bus interface*1
			24	VDC ± 5%, average:*2
			0.33		(1.72) A (at		25 mm/s printing speed, 25% printing ratio)
		For head	0.64		(3.01) A (at		50 mm/s printing speed, 25% printing ratio)
Power supply			3.09		(5.58) A (at 100 mm/s printing speed, 25% printing ratio)
			(	): Peak
		For motor	24	VDC ± 5%, 1.0 A maximum
		For logic	5 VDC ± 5%, 0.5 A maximum
Weight			Mechanism: approximately 290 g. Interface board: approximately 100 g
Dimensions		Mechanism	159 (W) × 48 (D) × 28.0 (H) mm (excluding connector)
		Interface board	140 (W) × 89 (D) × 24.0 (H) mm

(Continued)

2