Fujitsu FTP-641MCL302 manual Overview, Highlights, Ultra high speed printing, Auto cutter

24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER 4” MECHANISM, WITH AVAILABLE CUTTER

FTP-641MCL301/302

■OVERVIEW

This thermal printer (driven by 24 VDC) and cutter provide high speed printing for 4-inch wide paper (114 mm). This printer is small in size, light weight, and has low power consumption. The print head features open construction for easy maintenance.

This printer is suitable for a variety of applications, such as POS terminals, ticket machines, label printers, measuring devices and medical equipment.

In addition to the interface board, a driving LSI (MCU + Gate Array) is also available.

■HIGHLIGHTS

•Ultra high speed printing

It can print at 100 mm/s (800 dotlines/s) by using Fujitsu Components' unique head drive control system.

• Auto cutter

Full or partial cutting are available by normal or reverse rotation of the motor (command set).

• Low power consumption

The peak current for head driving is approximately 6.0 A (at 50 mm/s printing speed, 50% printing ratio).

• Easy head access

Head-open construction makes head maintenance easy, especially for head cleaning.

• Paper auto loading function

The thermal paper can be loaded without head-up lever operation.

• High resolution

8 dots/mm head provides clear print output.

• Selectable paper paths

Front or rear insertion types are available.

FTP-641MCL302 can print on paper thicknesses of up to 150 μm.

FTP-641MCL301/302 shown after assembly with FTP-641CT001cutter

FTP-621CU102, FTP-633GA101

FTP-621DCL012

1