FTP-641MCL351/352
(Continued)
| Item |
| Specifications |
| |
|
|
|
|
| |
|
| 24 VDC ± 5%, average:*2 |
|
| |
|
| 0.82 (1.11) A (at 25 mm/s printing speed, | 25% printing ratio) | ||
| For head | 1.25 (1.66) A (at 50 mm/s printing speed, | 25% printing ratio) | ||
|
| 4.75 (6.30) A (at 50 mm/s printing speed, 100% printing ratio) | |||
Power supply |
| ( ): Peak |
|
|
|
|
|
|
|
| |
| For motor | 24 VDC ± 5%, 1.0 A maximum |
|
| |
|
|
|
|
| |
| For logic | 5 VDC ± 5%, 0.5 A maximum |
|
| |
|
|
| |||
Weight |
| Mechanism with cutter: approximately 610 g | |||
|
| Interface board: approximately 100 g |
| ||
|
|
| |||
Dimensions | Mechanism + cutter | 159 (W) × 60 (D) × 71.0 (H) mm (excluding connector) | |||
Interface board | 140 (W) × 89 (D) × 24.0 (H) mm |
| |||
|
| ||||
|
|
| |||
| Thermal head | Pulse durability : 5 × 107 pulse/dot (using Fujitsu & Takamisawa's | |||
Life |
| standard driving method) | |||
| Wear resistance : 50 km (at 12.5% printing ratio) | ||||
|
| ||||
|
|
|
|
| |
| Cutter | Cutting life: 3 × 105 times |
|
| |
|
|
|
|
|
|
| Operating temperature | +5 to +40°C*3 |
|
|
|
|
|
|
| ||
Environmental | Operating humidity | 20 to 85% RH (no condensation) |
| ||
|
|
|
|
| |
conditions | Storage temperature |
|
| ||
|
|
| |||
|
|
|
|
| |
| Storage humidity | 5 to 95% RH (no condensation) |
|
| |
|
|
| |||
| Head temperature | By thermistor (applied energy control, abnormal temperature detection) | |||
|
|
|
| ||
Detection | Paper out/Mark detect | By photointerrupter (command set) |
| ||
|
|
|
|
|
|
| By microswitch |
|
|
| |
|
|
|
|
|
|
Paper width |
| +0 |
|
|
|
|
|
|
| ||
|
|
|
|
| |
Recommended thermal sensitive | 1 ply paper in roll | : | |||
paper*4 |
|
|
|
|
|
|
|
|
|
|
|
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Please contact us for other thermal papers.
3
