Fujitsu FTP628 MCL383 manual FTP-628MCL383, Specifications, DESIGNMedium life storage paper

FTP-628MCL383

■SPECIFICATIONS

		Item				Specification
				FTP-638MCL383#01/ #02
Interface				Conforms to RS232C / Centronics
		For print head		4.2 VDC to 8.5 V, peak current 1.1A (2 inch), 2.4A (3 inch) Printing
				ratio: 12.5%, printing speed 50mm/sec.
Operating
		For motor		4.2 VDC to 8.5 V, 1 A maximum
Voltage
		For logic		5 VDC ± 5%, 0.5 A maximum
		For Cutter		5 VDC ±5% 3 A maximum
External dimensions				87.6 x 66.3.0 x 33 mm (WxDxH)
Weight				Approximately 240g
				Pulse resistance: 100 million pulses/dot (under our standard
Head life				conditions). Abrasion resistance: paper traveling distance 50km
				(print ratio: 25% or less)
Cutter life				500,000 cuts
		Operating temperature		+5˚ C to +40˚	C (printing density assurance range, operation is
				possible at 0˚		NEW
					C to +50˚ C)
Operating		Operating humidity		20 to 85% RH (no condensation)
environment
		Storage temperature		-40˚ C to +70˚	C (paper not included)
		Storage humidity		5 to 95% RH (no condensation)
				FOR
Detection		Head temperature		Detected by thermistor
		detection
function
		Paper out/mark detection		Detected by photo-interrupter
	NOT			High sensitive paper:			TF50KS-E4 (Nippon Paper)
							TK50KS-E (Nippon Paper)
				Standard paper:			PD150R (Oji Paper)
							FTP-020P0107 (58mm)
							FTP-030P0107 (80mm)
							TK60KS-F1 (Nippon Paper)
Recommended thermal sensitive paper							FTP-020P0102 (58mm)
			DESIGNMedium life storage paper:				FTP-030P0102 (80mm)
							PD170R (Oji Paper)
							AFP220VBB-1 (Mitsubishi Paper)
							PD160R-N (Oji Paper)
				Long life storage paper:			AFP-235 (Mitsubishi Paper)
							TP50KJ-R (Nippon Paper)
							HA112AA (Nippon Paper)

*+5˚C to +40˚C printing density assurance rance (-25 to 70˚C capability)

3