SCALEOVIEW H22-1W
Having this problem? Check the follow ing points:
Picture position not correct The monitor recognises an undefined mode (see the
"Technical data" chapter).
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
Set the picture position with the OSD menu (see the
"Operation of the monitor" chapter).
Picture is shaking Check whether the data cable for the monitor is
correctly attached to the monitor port on the computer.
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
Picture is wrongly adjusted Press the SELECT/MENU button to activate the
function Factory Recall. The Auto Processing message
is displayed.
Picture disturbances (vertical lines)
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
Picture disturbances
(horizontal lines, picture noise)
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
The screen becomes darker The background lighting has a limited lifetime. If your
monitor display should become too dark, the background
lighting will have to be exchanged.
Please contact our help desk.
22 A26361-K1118-Z120-1-7619, edition 3