1. Installation
- 19 -
Before installing the system, confirm that the installation location meets the
requirements. After confirmation, install and connect the chassis required for the
system configuration.
Reference Fujitsu M10/SPARC M10 Systems Installation Guide
"1.1 Workow for the SPARC M10-1"
"1.2 Workow for the SPARC M10-4"
"1.3 Work��ow for the SPARC M10-4S"
"1.4 Workow when Connecting the PCI Expansion Unit"

b. Installing the system - Connecting a chassis

If you have ordered any option, such as a memory module or PCIe card, mount the
additional component during installation.
Reference Fujitsu M10-1/SPARC M10-1 Service Manual
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S
Service Manual
PCI Expansion Unit for Fujitsu M10/SPARC M10 Systems
Service Manual

c. Adding an optional component

Before starting the system, configure the initial settings of the eXtended System
Control Facility (XSCF). Use the CPU Activation function to also configure the use
of resources according to the number of purchased CPU cores activated.
Reference Fujitsu M10/SPARC M10 Systems Installation Guide
"Chapter 6 Performing an Initial System Diagnosis"
"Chapter 7 Making the Initial System Settings"
In addition, configure operation in, for example, a virtual environment configuration,
as necessary.

d. Configuring the initial system settings

a. Understanding an overview of the system

Check the SPARC M10 Systems overview.
Reference "Understanding an Overview of the System" (This document)