Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC® Enterprise M5000 Page 37 / 38
Cables for connecting BG57 boxes to SCSI controller (up to 80MByte/s, device dependent)
D:KB235-M3 SCSI cable 3m (68pin UHD and 68 pi n
A
mplimite)
D:KB235-M5 SCSI cable 5m (68pin UHD and 68 pi n
A
mplimite)
D:KB235-M8 SCSI cable 8m (68pin UHD and 68 pi n
A
mplimite)
D
D:KB243-M10 SCSI Connection Cable, 10m
These cables can be installed if the boxes contain drives
with LVD I/F only.
Cables to configure the BG57 box
α EPRCK-AN60 Upgrade kit PW BG57 to 4 channel U160
The cable connects 1 or 2 bays in a BG57 to 1 input
connector of the box.
2 cables are included in the kit
1 kit (=2 cables) are included in BG57
β EPRCK-AN62 Change kit PW BG57 to 1 channel U160 This kit is needed when all 4 bays must be connected in
daisy chain to 1 input connector of the box. The
standard cables of the box cannot be used in this case.
Service clearance
front side
19-inch rack
Service clearance
rear side
800 mm 700 mm 800 mm
900 mm
1100 mm
800 mm
Service clearance
front side
19-inch rack
Service clearance
rear side
800 mm 700 mm 800 mm
900 mm
1100 mm
800 mm
Please refer also to:
Sparc Enterprise Server
Link:
http://partners.fujitsu-siemens.com/com/products/servers/unix/server%20hardware/SPARC%20Enterprise%20server/Pages/default.aspx
Powertool
Link:
http://partners.fujitsu-
siemens.com/com/products/servers/unix/Config%20and%20Tools/SPARC%20Enterprise%20Server%20Powerconfigurator/Pages/default.aspx
Available and supported external storage peripherals and UPS
Links:
Please refer to:
http://partners.fujitsu-siemens.com/com/products/storage/Pages/default.aspx
http://partners.fujitsu-siemens.com/com/products/servers/primergy/conftools/MatrixEP/MatrixEP/Pages/default.aspx