Product Facts ⏐ Issue: June 01, 2008 ⏐ Product: SPARC® Enterprise M5000 Page 35 / 38
Hard Disk drives for DN413*
D:GPDS2-FP81 Hard disk 73GB 15kRpm 73 GByte 15,000rpm, Ultra SCSI LVD320
Fast drives with short access time
D:GPDS2-FP84 Hard disk U320 10k 146 GB 146 GByte 10,000rpm, Ultra SCSI LVD320
D:GPDS2-FP85 Hard disk U320 10k 300 GB 300 GByte 10,000rpm, Ultra SCSI LVD320
D:GPDS2-HDP3 HD bundle with 4 x 73 GB 15Krpm 292 GByte of disk space, 4 drives 73 GByte each
D:GPDS2-HDP4 HD packet with 4 x 146 GB U320 10Krpm 584 GByte of disk space, 4 dri ves 146 GByte each
A
llowed in DN413.
D:GPDS2-FP86 Hard disk 73GB 15kRpm 73 GByte 15,000rpm, Ultra SCSI LVD320
Fast drives with short access time
D:GPDS2-HDP5 HD bundle with 4 x 73 GB 15Krpm 292 GByte of disk space, 4 drives 73 GByte and 15,000rpm
each
NOTES on disks for DN413:
These HDDs can be mounted in „DN413 boxes“ only, but NOT in system cabinets.
Disk subsystems, cable connection diagrams with cable list
Connecting Disk node DN413 to SCSI HBAs within single node configurations
(up to 320 MByte/s)
DN413 is not usable for shared disks in cluster configurations.
7 disk bay
UltraSCSI
I/O module
7 disk bay
UltraSCSI
I/O module
D:GPDS2 -
SV30 Redundant PSU
D:GPDS2 -DN413
Disk Subsystem Dual Port 3U
F
LVD -SCSI PCI –
U320 HBA
7 disk bay
UltraSCSI
I/O module
7 disk bay
UltraSCSI
I/O module
D:GPDS2 -
SV30 Redundant PSU
D:GPDS2 -DN413
Disk Subsystem Dual Port 3U
FF
LVD -SCSI PCI –
U320 HBA
The second UltraSCSI I/O module in this drawing can either be connected to the second port of a DualPort HBA or to another
HBA which may or may not belong to another partition.
Cables for connecting disk nodes -DN413 to U320 SCSI HBA (up to 320 MByte/s)
D:GPDS2-KB04 SCSI cable UHD68(S)-UHD68(S) 4m (DN41*)
D:GPDS2-KB05 SCSI cable UHD68(S)-UHD68(S) 5m (DN41*)
D:GPDS2-KB10 SCSI cable UHD68(S)-UHD68(S) 10m (DN41*)

F

SNP:SY-F2365E500-P SCSI cable UHD68(S)-UHD6 8(S), customized length
needed, if the rack internal cabling shall be done by
factory.
Note on cable carrier:
The cable carrier
GPRAC-ZB527 requires
additional cable length of
approx. 1m