Intro(8)
man | display manual pages of specified XSCF shell command |
moveboard | move an eXtended System Board (XSB) from the current |
| domain to another |
nslookup | refer to the DNS server for the host |
password | manage user passwords and expiration settings |
poweroff | turn off the power to the specified domain |
poweron | turn on the power to the specified domain |
prtfru | display FRUID data on the system and External I/O |
| Expansion Unit |
rebootxscf | reset the XSCF |
replacefru | replace a field replaceable unit (FRU) |
reset | reset the specified domain |
resetdateoffset | reset the time subtraction between XSCF and the domain. |
sendbreak | send a break signal to the specified domain |
setaltitude | set the altitude of the system |
setarchiving | configure the log archiving functionality |
setaudit | manage the system auditing functionality |
setautologout | set the session timeout time of the XSCF shell |
setcod | set up the Capacity on Demand (COD) resources used for |
| domains |
setdate | set the date and time of XSCF |
setdcl | set a domain component list (DCL) |
setdomainmode | set a domain mode |
setdomparam | forcibly rewrite OpenBoot PROM environment variables |
setdscp | set the IP address assignments for the Domain to Service |
| Processor Communications Protocol (DSCP) |
setdualpowerfeed | set dual power feed mode |
setemailreport | set up the email report configuration data |
sethostname | set a host name and domain name for an XSCF unit |
sethttps | start or stop the HTTPS service, which is used in the XSCF |
| network. This command also performs authentication- |
| related settings. |
2 | XSCF Reference Manual • Last Revised June 2006 |