Intro(8)
showaudit | display the current auditing system state |
showautologout | display the session timeout time of the XSCF shell |
showboards | display information on an eXtended System Board (XSB) |
showcod | display Capacity on Demand (COD) configuration |
| information |
showcodlicense | display the current Capacity on Demand (COD) |
| use (RTU) licenses stored in the COD license database |
showcodusage | display the current usage statistics for Capacity on Demand |
| (COD) resources |
showconsolepath | display information on the domain console that is currently |
| connected |
showdate | show the date and time of XSCF |
showdcl | display the current domain component list (DCL) |
showdevices | display current information on an eXtended System Board |
| (XSB) |
showdomainmode | display the domain mode |
showdomainstatus | display the current domain component list (DCL) |
showdscp | display the IP addresses assigned to the Domain to Service |
| Processor Communications Protocol (DSCP) |
showdualpowerfeed display the current setting of dual power feed mode showemailreport display the email report configuration data
showenvironment display the intake air temperature and humidity, temperature sensor information, voltage sensor information, and fan rotation information about the system
showfru | display the hardware settings of specified device |
showhardconf | display information about field replaceable unit (FRU) |
| installed in the system |
showhostname | display the current host name for the XSCF unit |
showhttps | display the status of the HTTPS service set for the XSCF |
| network |
showldap | display the Lightweight Directory Access Protocol (LDAP) |
| configuration for the Service Processor |
showlocale | display the current setting for the XSCF locale |
showlocator | display the state of the CHECK LED on the operator panel |
4 | XSCF Reference Manual • Last Revised June 2006 |