addcodlicense(8)

NAME addcodlicense - add a Capacity on Demand (COD) right-to-use (RTU) license key to the COD license database

SYNOPSIS addcodlicense license-signature

addcodlicense -h

DESCRIPTION addcodlicense(8) adds the COD RTU specified license key to the COD license database on the Service Processor. When the license key is added, the quantity of headroom is reduced by the quantity provided by the license key. The quantity of headroom cannot be lower than 0.

Note – Before you run this command, you must obtain a COD license key. To obtain a license key, contact your sales representative. For details on COD RTU license keys, refer to the COD documentation for your server.

Privileges You must have platadm privileges to run this command.

Refer to setprivileges(8) for more information.

OPTIONS The following option is supported:

-h

Displays usage statement.

 

When used with other options or operands, an error occurs.

OPERANDS The following operand is supported:

license-signatureSpecifies the COD RTU license key to be added to the COD license database.

EXAMPLES EXAMPLE 1 Adding a COD RTU License Key

XSCF> addcodlicense \ 01:84000000:104:0301010100:3:00000000:xxxxxxxxxxxxxxxxxxxxxx

After this command completes, you will see messages similar to these in the XSCF console:

codd 15:51:36: COD PROC Headroom changed to 1

codd 15:51:36: Headroom reduced after adding the license

EXIT STATUS The following exit values are returned:

0

Successful completion.

>0

An error occurred.

System Administration

11