applynetwork(8)

NAME

 

applynetwork - reset XSCF to reflect information that has been set for the XSCF

 

 

 

network

SYNOPSIS

 

applynetwork [ [-q]-{yn}][-M]

 

 

applynetwork -h

DESCRIPTION

 

applynetwork(8) resets XSCF to reflect network information that has been set for

 

 

an XSCF unit.

 

 

When setting one of the following, XSCF should be reset to reflect network

 

 

information using the applynetwork(8) command.

 

 

■

XSCF host name

 

 

■

DNS servers

 

 

■

DNS domain name

 

 

■

IP address

 

 

■

netmask

 

 

■

routing

 

 

Host name, DNS domain name, name server, IP address, net mask, and routing

 

 

setting information is displayed when resetting. In case the active XSCF is normal

 

 

and the standby XSCF is abnormal, resets the active XSCF only.

 

 

Note – If XSCF is reset without using the applynetwork(8) command, network

 

 

information that is set is not reflected in XSCF. Also, information that is set is

 

 

deleted.

Privileges

 

You must have platadm privileges to run this command.

 

 

Refer to setprivileges(8) for more information.

OPTIONS

 

The following option is supported:

 

 

-h

Displays usage statement. When used with other options or

 

 

 

operands, an error occurs.

 

 

-M

Displays text by page. This option provides a function that is

 

 

 

the same as that of the more command.

 

 

-n

Automatically answers 'n' (no) to all prompts.

 

 

-q

Suppresses all messages to stdout, including prompts.

 

 

-y

Automatically answers 'y' (yes) to all prompts.

OPERANDS

 

There are no operands.

 

 

 

 

System Administration

17