Cleaning
3)Cover the cartridge with the setting case cover, then insert the spindle pin into the center hub of the cortridge.
Disk media
Revolver
Setting case cover
Disk hub
Figure 5.5 Cleaning procedure (3)
4)Remove a slender piece that causes a defect from the disk surface at wiping the disk media.
5)Moisten the cleaning cloth with a few drops of cleanser.
In case of contact, immediately flush eyes with water.
6)Wipe the disk surface from the hub outward.
7)Turn the revolving knob, then wipe the disk surface.
Cleaning cloth
