Fujitsu N6000 Primary Master Submenu of the Main Menu, Auto, Enter, Menu Field, Options, Default

L i f e B o o k N S e r i e s N o t e b o o k B I O S

Primary Master Submenu of the Main Menu

The Primary Master submenu identifies what ATA devices are installed.

PhoenixBIOS Setup Utility

Main

Primary Master [FUJITSU MHT2060AH-(PM)]		Item Specific Help
Type:	[Auto]]	Select ATA/ATAPI drive
	LBA Format	installed here.
Total Sectors:	117210240
Maximum Capacity:	60012MB	[Auto]
		The BIOS auto-types the
Multi-Sector Transfers:	[16 Sectors]	drive on boot time.
LBA Mode Control:	[Enabled]
Transfer Mode:	[FPIO 4 / DMA 2]	Except [Auto]
Ultra DMA Mode:	[Disabled]	You enter parameters of
		the drive.
		[None]
		The drive is disabled.

F1	Help	Select	Item	-/Space	Change	Values
ESC	Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 2. Primary Master Submenu

F9 Setup Defaults

F10 Save and Exit

Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu

Menu Field	Options		Default	Description
Type:	■	Auto	[Auto]	Selects the ATA/ATAPI device type. To change the selection, press
	■	None		the spacebar. Select Auto to have the type automatically identified
	■	CD-ROM		by the BIOS at POST. If None is selected, all of the following Set-up
	■	Hard Disk		items do not appear. Select CD-ROM if a CD-ROM drive is installed
				at this connection. If Hard Disk is selected, you must specify the
				number of Cylinders, Heads, and Sectors for the drive.
LBA Format				Logical Block Addressing (LBA)
Total Sectors:	---		---	The total number of sectors on your hard disk
Maximum	---		---	The maximum capacity of your hard disk
Capacity:
CHS Format				Cylinders/Heads/Sectors
Cylinders:	■	A number between	–—	This item is active only when Hard Disk is selected as the type. This
		0 and 65,535		field is changed by incrementing (pressing the [Spacebar]) or by typ-
				ing in the number.

6