SELECTING INPUT MODE (Continued)

VIDEO INPUT MODE

1

Press to select the input mode.

You can select from VIDEO 1 mode to VIDEO 7 mode.

The video modes corresponding to each input terminal are as follows.

•VIDEO1: SCART

•VIDEO2: SCART

• VIDEO3: Video, S-video

• VIDEO4: SCART

Video1 mode

*You can also use the buttons on the display’s control panel to perform these steps.

• VIDEO5: Component video

• VIDEO6: Component video

• VIDEO7: HDMI

*For selection of the input terminal, see “SETTING THE INPUT TERMINALS” on P. E-40.

*You can also change VIDEO mode by pressing – during “Video” indication on the screen by pressing .

RGB INPUT MODE

1

Press to select the input mode.

 

You can select between the modes from RGB1 to

 

RGB2.

 

The input terminal of each RGB mode is as follows.

 

• RGB1: mD-sub

 

• RGB2: mD-sub

 

* You can also change RGB mode by pressing 

RGB1 mode

– during “RGB” indication on the screen by

 

pressing .

 

*You can also use the buttons on the display’s control panel to perform these steps.

E-28