2.4Checking Scanner Driver Operation

This section explains how to check the operation of the installed scanner driver by using ScandAll PRO. Make sure that the scanner driver is installed properly, following the procedure below.

■Checking the Operation of the Scanner Driver

1.Load the document on the scanner.

For information about how to load the document, refer to section "2.6 Loading Documents on the ADF for Scanning" in the "fi-5950 Operator's Guide."

2.Launch ScandAll PRO.

From the [start] menu, select [All Programs] D [Fujitsu ScandAll PRO] D [ScandAll PRO].

3.In ScandAll PRO, select [Tool] on the menu, and then select [Preferences].

⇒The [Setup] dialog box appears.

4.On the [Scan] tab, select a driver.

To check the operation of TWAIN driver, select [TWAIN].

To check the operation of the ISIS driver or Kofax VRS, select [ISIS/VRS].

5.Click the [OK] button to close the [Setup] dialog box.

6.In ScandAll PRO, select [Scan] on the menu, and then select [Select Scanner].

7.Select a scanner in the displayed dialog box.

To use TWAIN driver:

Select [FUJITSU fi-5950d], and then click the [Select] button.

To use ISIS driver:

Select [Fujitsu fi-5950], and then click the [Select] button.

To use Kofax VRS:

Select [Kofax VRS Scanner], and then click the [Select] button.

 

 

When using Kofax VRS for the first time, the

 

 

HINT

 

[Register Kofax VRS] screen appears. User

 

 

registration is required to obtain support

 

 

information from Kofax as well as to upgrade

 

 

 

 

the software, though Kofax VRS can still be

 

 

used without user registration.

 

 

To register later, select [Start] menu D [All

 

 

Programs] D [Kofax VRS] D [Kofax VRS

 

 

Administration Console], and follow the on-

 

 

screen instructions.

 

 

For details, refer to the Kofax VRS Installation

 

 

Guide (PDF) which is included in the Setup

 

 

DVD-ROM

 

 

(\VRS\HVRS\HVRS\Documentation).

8.Select [Scan] on the menu, and then select [Scan Settings].

9