FACTORY SETTINGS

This display can store the latest four types of signals for RGB adjustment value. The fifth input signal will replace the adjustment value of the first input signal.

To do this, select a desired signal and follow the instructions in “Adjusting Screen Position and Size” on P. E-22–E-23 to adjust the parameters. When you finish, the settings will be automatically stored. Thus, when the display receives that signal, pictures will be displayed in accordance with the settings you most recently selected.

Main corresponding signals (RGB mode)

Display (dots x lines)

Horizontal frequency (kHz)

Vertical frequency (Hz)

Signal

 

 

 

 

640 x 480

31.47

59.94

VGA

 

 

 

 

640 x 480

37.50

75.00

VGA 75 Hz

 

 

 

 

640 x 480

43.27

85.01

VGA 85 Hz

 

 

 

 

720 x 400

31.47

70.09

400 lines

 

 

 

 

800 x 600

37.88

60.32

SVGA 60 Hz

 

 

 

 

800 x 600

46.88

75.00

SVGA 75 Hz

 

 

 

 

800 x 600

53.67

85.06

SVGA 85 Hz

 

 

 

 

1024 x 768

48.36

60.00

XGA 60 Hz

 

 

 

 

1024 x 768

60.02

75.03

XGA 75 Hz

 

 

 

 

1024 x 768

68.68

84.99

XGA 85 Hz

 

 

 

 

1280 x 1024

63.98

60.02

SXGA 60 Hz

 

 

 

 

1280 x 1024

79.98

75.03

SXGA 75 Hz

 

 

 

 

1600 x 1200

75.00

60.00

UXGA 60 Hz

 

 

 

 

1600 x 1200

106.25

85.00

UXGA 85 Hz

 

 

 

 

848 x 480

31.02

60.00

 

 

 

 

 

852 x 480

31.72

59.97

 

 

 

 

 

1360 x 768

47.71

60.01

 

 

 

 

 

720 x 485

15.73

59.94

60 fields

 

 

 

 

720 x 575

15.63

50.00

50 fields

*With some input signals, “Out of range” may appear even when the horizontal and vertical frequencies are within their permissible ranges. Make sure that the vertical frequency of the input signal is 85 Hz or less for SVGA/XGA/UXGA, 75 Hz or less for SXGA.

In the Video/S-video modes, the display has been factory-set as follows for different input signals:

Main corresponding signals (Video, S-video mode)

Horizontal

Vertical

Signal

frequency (kHz)

frequency (Hz)

 

 

 

 

15.73

59.94

NTSC

 

 

 

15.63

50.00

PAL

 

 

 

15.63

50.00

SECAM

 

 

 

15.63

59.52

PAL60

 

 

 

15.73

59.94

4.43NTSC

 

 

 

English

Depending on the input signal, the display may show pictures of reduced size due to size reduction and interpolation.

“Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range.

You can check input signals through “Information” on the FEATURES Menu screen. (See P. E-33.)

In order to facilitate the explanations, pictures and diagrams in this manual may differ slightly from the actual items.

All terms (i.e., company and product names) used in this document are trademarks or registered trademarks.

E-37