English
• Setting Exhibition Mode (Exhibition Mode)
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press 
to store.
*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
*The setup will be cancelled when removing the power plug from the receptacle.
•Horizontal/Vertical installation (Installation)
You can use this option to setup the number of fan rotation and the direction of display text of menu or other screen for horizontal and vertical installation.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Normal : Displays text normally.
+90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the bottom.
Press 
to store.
*Be sure to make this setup when changing the direction of installation.
•Displaying System Status (Information)
Displays system operation status.
Select “Information” and press | . |
|
| |
|
| |||
The “Information” screen will appear. |
|
|
| |
Mode: | Input mode |
|
|
|
Monitor No.: | Monitor number |
|
|
|
Freq. Scan Mode: Frequency scanning |
|
| ||
|
| |||
Input Sync.: | Signal type | Information screen (RGB2 Input Mode) | ||
|
|
| ||
Freq.: | Frequency and polarity (fH, fV) | |||
Preset No.: | RGB code number | |||
*