OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
• Minimizing phosphor
You can use this option to move the screen position to minimize
Follow the steps below.
(1)Select “Screen Orbiter” and press 
.
The “Screen Orbiter” setting screen will appear.
(2)Press 
or 
to select “Mode/Time”.
(3)Select a desired pattern.
Each time you press or , one of the available choices appears in the following sequence: | “Screen Orbiter” setting screen |
|
Off: Disables Screen Orbiter.
Time: Moves the pattern approximately every one hour.
Mode: Moves the pattern when the power is turned ON.
(4)Press 
or 
to select “Moving Area”.
(5)Press 
or 
to select the range for moving the pattern.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Min.: Pattern moves in small range. (About 5 pixels)
Std.: Pattern moves in moderate range. (About 10 pixels)
Max.: Pattern moves in wide range. (About 15 pixels)
(6)Press 
to store.
Using screen protection functions (examples)
The screen protection functions minimize phosphor
When using the display occasionally | When using the display continuously | |
|
|
|
• Select a desired amount of time for “DPMS”. | (1) | Select “Time” for “Mode/Time” within “Screen Orbiter”. |
Thus, when the display does not receive a signal, it will automatically | (2) | Select a desired range for “Moving Area” within “Screen Orbiter”. |
display white or black over the entire screen. When the predetermined |
| This causes the screen saver pattern to move in the same range at |
time elapses, the power will turn OFF. |
| regular intervals. |
|
|
|
*
*Functions may not be available with some models and some device options.
*The adjustment range varies with the display signal. You can make adjustments to the value you want within the adjustable range.