Rear view

 

 

SYNC

AUDIO

VIDEO S-VIDEO CONPONENT

 

SW

RGB

INPUT

INPUT INPUT VIDEO INPUT

 

 

 

 

TTL INPUT RS-232C

 

 

 

 

R L

 

 

 

 

 

ANALOG

 

 

 

 

 

 

 

 

 

 

 

(75Ω )

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Power switch

•When pressed, power lamp ➀ lights red, and the power can be turned on or off by the remote control- ler. When this switch is pressed again, the power is cut and power lamp ➀ goes off.

Power input terminal

•Firmly insert the accessory power cord as far as it will go into the power input terminal.

•Firmly push the power cord plug as far as it will go into the power socket (100–240 VAC).

Video input terminal (VIDEO INPUT)

•Connects to the video output terminal of a video deck or video disc player.

S video input terminal (S-VIDEO INPUT)

•Connects to the S video output terminal of a video deck or video disc player.

Component video input terminal (COMPONENT VIDEO INPUT)

•Connects to the component video output terminal of DVD, and similar devices.

RGB input terminal (RGB INPUT)

•Connects to the computer monitor's (analog RGB) output terminal.

Cables connecting the personal computer vary ac- cording to the type of machine, so consult your prod- uct dealer.

ENGLISH

RS-232C input terminal (RS-232C)

• Connects to the computer RS-232C output terminal.

Audio input terminals (AUDIO INPUT)

•Connects to the audio output terminal of a video deck or similar device.

Sync switch (SYNC SW TTL/ANALOG (75 Ω))

•For switching the RGB terminals' 13-pin horizontal sync and 14-pin vertical sync to terminate with 75 Ω.

When an analog synchronous signal is input at the

RGB terminal, be sure that this switch is set to ANA- LOG (75 Ω). For connection to a personal computer,

be sure it is set to TTL.

PC card slot

•Where the PC card is loaded and unloaded. This can be locked with the accessory key.

PC card access lamp

• Lights while the PC card is being accessed.

11