USING PC CARD

Rear

PREPARATION

 

How to load and unload the PC card

•To use your purchased PC card, first initialize your personal computer again (format compatible with MS-DOS (R)).

This initialization need be done once only.

1 Creating programs on the PC card is done using the accessory program creation software.

Refer to the PC cards operation manual for how to initialize the PC card and how to create and save programs on the PC card.

2 Loading/unloading the PC card

•Switch on the Plasmavision's power.

If the power lamp is lit (red or green), press the power switch at the rear to turn off the power. Confirm that the power lamp is not lit.

•Open the door to the PC card slot on the side of the Plasmavision.

•When loading the PC card, insert the PC card into the PC card slot.

∗Insert the PC card for creating or storing programs with the accessory program creation software.

•Push the PC card right into the slot until the button on the side of the card slot pops up.

•Confirm that the PC card is inserted completely, and close the door of the PC card slot.

•Lock the door with the accessory key (to prevent theft of the PC card).

Open

Front side

Arrow indicating loading direction

CAUTION

•Do not insert your finger or any other object into the PC card slot when loading or unloading the PC card.

•Do not insert the PC card back to front. Also, do not insert the PC card at an angle or use excess force to push it in.

•When loading or unloading the PC card, be sure that the power switch of the Plasmavision is off.

Insert PC card.

∗Do not insert it back to front.

16