ACCESSORIES
Checking Accessories
Cable clamper ⋅ 2 | Power cord | Remote controller ⋅ 1 | AA battery ⋅ 2 | |
|
|
| ||
|
|
| ||
USER’S |
|
| Screw A (10 mm) |
|
MANUAL |
|
|
| |
|
|
|
| |
| A | B | Screw B (20 mm) |
|
|
|
| ||
User’s Manual ⋅ 1 | Bracket ⋅ 2 (2 type) | Screw ⋅ 2 (2 type) | Key ⋅ 2 | |
| OPERATING |
| GUIDE |
Floppy Disk for Installing | Operating Guide ⋅ 1 |
PC Card Utility for |
|
Plasmavision ⋅ 3 |
|
Cable clampers
•The accessory cable clampers are for fastening the connected signal cables and a power cable. When installing this display on a wall or ceiling, insert the cable clampers into the holes on the rear of the display.
Bundle connecting cables so that they lead downwards, as in the illustration.
Cable clamper
(Attach as in the illustration.)
Connecting to External Equipment
Cables for connecting external equipment must be
purchased separately.
Connectors
AUDIO INPUT | Pin jack |
|
|
VIDEO INPUT | BNC |
|
|
S terminal | |
|
|
COMPONENT VIDEO INPUT | BNC |
|
|
RGB INPUT | |
|
|
|
|
∗When connecting separately pur- chased BNC terminals, conversion
connectors are required between the pin jacks and the BNC terminals, so purchase these also.
∗Cables connecting the personal com- puter vary according to the type of machine, so consult your product dealer.
To audio output terminal
| SYNC SW |
| TTL/ANALOG (75Ω ) |
AUDIO INPUT | |
| RGB INPUT |
VIDEO INPUT |
|
| COMPONENT |
VIDEO INPUT | |
INPUT | (color difference |
| input) |
|
| Display |
|
To video | To | (to analog |
|
output | output | RGB | To |
terminal | terminal | output | |
|
| terminal) | terminal |
| To component |
|
| video output |
|
6 | terminal | Connecting to PC |
Connecting to AV equipment |
| |
|
|