INSTALLATION
To prevent the display’s internal components from overheating, make sure that the display is installed in a
Be sure to use the optional stand,
See the appropriate instruction manual for more information on the installation hardware you select.
To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into position as described below. To ensure proper heat radiation, provide at least as much space around the display as shown below.
*Make sure that the display is installed in a location where the temperature can be maintained between 0° C and 40° C.
*Never attempt to tilt the display sideways or backward.
*To prevent the power and other cables from being accidentally pulled, make sure that they run along the wall or through corners.
*The display can be installed with either of its sides facing down.
When using the stand
Front |
| Side |
|
Upper | (cm) | 1.5 | (cm) |
|
|
| |
10 |
|
|
|
10 | 10 |
| Wall |
Left | Right |
| |
|
| ||
| 6 |
|
|
Floor |
| Floor |
|
When using the
Front |
| Side |
| (cm) | (cm) |
Upper |
| Wall mounting unit |
10 |
|
|
10 | 10 |
|
Left | Right | Wall |
|
|
6
Lower
1.5
When using the
FrontSide
Upper | (cm) | (cm) | |
| 10 |
| Wall mounting unit |
10 | 10 |
|
Left | Right | Wall |
|
|
10
Lower
1.5
* When installing the display vertically, be sure to rotate the text.(Refer to OSD Rotate. See P.30) and setup vertical installation. (Refer to Installation. See P.35)
Note
The display is a highly precise piece of equipment and therefore must be packed properly before transportation. Be sure to use only those packing materials originally supplied with the display when repacking it.
Reference
See P. 37 for more information on options.
6