•FEATURES setup screen has the following 5 options.
Adjustment | : Can make a fine adjustment of pictures such as Dot clock, Clamp position. |
Function | : Can make a function setting such as Gradation. (See P. 30.) |
On Screen Menu : Can make a display setting such as OSD, Language. (See P. 30)
Input Terminal | : Can make an input terminal setting such as Video Input. (See P. 31 - 32.) |
Others | : Can make other settings. (See P. 32 - 35.) |
ADJUSTMENT
• Adjusting Dot Clock (Dot clock)
You may find that pictures blur, depending on the clock frequency of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Dot Clock”.
Use 
or 
to select a value between
Press 
to store.
• Adjusting Clock Phase (Clock Phase)
You may find that pictures blur, depending on the clock phase of your PC’s processor. If you experience blurring, you can obtain a clearer picture by adjusting the “Clock phase”.
Use 
or 
to select "Auto" or "Manual".
Auto: Makes automatic adjustment.
Manual: Does not make automatic adjustment.
Use 
or 
to specify a value between 1 and 32.
Press 
to store.
• Eliminating Flicker (Vertical Sync)
Corrects the vertical synchronization signal timing to eliminate vertical flicker.
Use 
or 
to specify a value between
Press 
to store.
• Adjusting Clamp Position (Clamp Position)
Adjusts clamp pulse in accordance with the input signal received from connected equipment.
Clamp pulse is automatically set at the optimal level when you do not use this option.
Use 
or 
to specify a value between
Press 
to store.
• Selecting the Optimum Dynamic Range of Images (Auto Calibration)
Receives a white screen signal and adjusts the dynamic range of images to the optimum.
(1)Select Auto Calibration and press 
. Auto Calibration screen appears.
(2)Select Execute and press 
.
Press 
or 
to select Yes or No. Yes: Stores the data of Auto Calibration.
No: Disables the execution result of Auto Calibration.
(3)Press 
to execute.
When selecting Manual by Clock Phase
"Auto Calibration" setting screen
"Yes/No" selection screen
*
*The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, 
: 
: Comp.video mode, 
: 
: Decoder mode
29