HOW TO USE MENUS
SELECTING OPTIONS IN A MENU
Use the [MODE] button on the display or 
and 
on the remote control to select a desired input mode.
1
2
Press 
.
The main menu screen will appear.
Press 
or 
to switch between
Each time you press 
or 
, one of the available menus appears. The corresponding menu screen will appear.
Ex.: “PICTURE” selected in the main menu screen
3 Press | or | to select an option for adjustment/setup. |
A total of five different menus (PICTURE, POSITION/SIZE, AUDIO, FEATURES, FACTORY DEFAULT) are available.
You can easily distinguish between these menus as shown below.
PICTURE | POSITION/SIZE | AUDIO | FEATURES | FACTORY DEFAULT |
*Press 
, 
, 
or 
to make adjustment/setup, and press 
to store.
*Do not change input signals when any of the menus are displayed.
*Audio Input menu will not be displayed when "No Audio" is selected. (See P.
USING THE PICTURE MENU
When you finish selecting a desired option in the PICTURE menu screen, press 
.
At this time, the adjustment/setup screen for that option will appear.
You can use 
or 
to change the value for the option. Press 
to store. (See P.
Changes you make will be stored only for the selected mode.
PICTURE Menu screen (Video Input Mode) | PICTURE Menu screen (RGB Input Mode) |