SELECTING INPUT MODE

VIDEO INPUT MODE

1

Press to select a desired input mode.

Each time you press , a different input mode appears. The sequence is as follows:

English

*You can also use the switches on the display’s control panel to accomplish these steps.

Video:

Displays pictures from equipment

 

connected to the Video terminal.

S-video:

Displays pictures from equipment

 

connected to the S-video terminal.

Comp.video:

Displays pictures from equipment

 

connected to the component video

 

input terminal.

*You can switch between video input modes while you are in RGB input mode.

*When Comp.video input terminal is connected, RGB3 mode is not available.

Setting is made in BNC Input mode. (See P. E- 31.)

S-video mode

Comp.video mode

RGB INPUT MODE

1

*You can also use the switches on the display’s control panel to accomplish these steps.

Press to select a desired input mode.

Each time you press , a different input mode appears. The sequence is as follows:

RGB1:Displays pictures from equipment connected to the RGB1 (DVI-D) terminal.

RGB2:Displays pictures from equipment connected to the RGB2 (mD-sub) terminal.

RGB3:Displays pictures from equipment connected to the RGB3 (BNC x5) terminal.

*You can switch between RGB input modes while you are in a video input mode.

*When RGB3 input terminal is connected, Comp.video mode is not available.

Setting is made in BNC Input mode.(See P. E- 31.)

RGB1 mode

RGB2 mode

E-15