OTHER ADJUSTMENTS (FEATURES MENU)(Continued)
• Setting Exhibition Mode (Exhibition Mode) | All modes |
You can use this option to display the enhanced contrast, which is most suitable for the use by unspecified persons.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Sets up Exhibition mode.
Off: Sets up normal mode.
Press 
to store.
*In Exhibition mode, the display returns to the original setting in about 5 minutes even if the adjustment is changed.
*The setup will be cancelled when removing the power plug from the receptacle.
• Horizontal/Vertical installation (Installation) | All modes |
You can use this option to setup the number of fan rotation and the direction of display text of menu or other screen for horizontal and vertical installation.
Each time you press 
or 
, one of the available choices appears in the following sequence:
Normal : Displays text normally.
+90 Deg. : Displays text from left to right when the display is installed with the power indicator lamp at the bottom.
Press 
to store.
* Be sure to make this setup when changing the direction of installation.
• Locking Main Unit Button (Key Lock) | All modes |
You can use this option to disable the main unit button.
Each time you press 
or 
, one of the available choices appears in the following sequence:
On 
Off
On: Disables the main unit button.
Off: Enables the main unit button.
Press 
to store.
• Displaying System Status (Information)
Displays system operation status.
Select “Information” and press 
.
The “Information” screen will appear.
Mode: | Input mode |
Monitor No.: | Monitor number |
Freq. Scan Mode: Frequency scanning | |
Input Signal: | Video mode |
Input Sync.: | Signal type |
Freq.: | Frequency and polarity (fH, fV) |
Preset No.: | RGB code number |
Information screen (Video Input Mode)
Information screen (RGB2 Input Mode)
*
*The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, 
: 
: Comp.video mode, 
: RGB mode