
3
6Attach the slide rails to the right and
left of the rack.
Attach the slide rails to the rst a nd the third holes from the bottom of the server.�������������
����������
��������������������
����������������������
����������������������
��������������������
������������
�����������
������
�������������������
����������
5Connecting peripheral devices
Peripheral devices, such as the keyboard and mouse, etc., are connected to the server in the following
order.
You can connect the external oppy disk connecte d for USB to the connector at the front of t he server.
� ��� �
�����������
��������������������������
�������
����������
���������
�
�������������
7Install the server in the rack.
1. Insert the inner rail to the g rooves of the
slide rail and slide the server towards the
back.
2. Pressing the locks on the right and left ,
slide the server even further and i nstall it
into the rack.
- Be careful not to pinch your ngers or catch any cl othing
when sliding the server into the cabinet.
This could cause injury.
- For a rst time installation, make sure to slide the ser ver
backward and x it to the rack securely.
8Fasten the server to the rack.
������
If the server or peripheral devices are n ot installed, install
the attached blank panel to the rack.
����