Hard Disk Security Submenu of the Security Menu

L i f e B o o k S S e r i e s N o t e b o o k B I O S

The Hard Disk Security Submenu is for configuring hard disk security features.

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 14. Hard Disk Security Submenu

F10 Save and Exit

Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu

Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.

Menu Field	Options		Default	Description


Serial ATA Port 0	---		---	A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
Password Is::				and Clear when it is not.

Primary Master	---		---	A display-only field. Not Available is displayed.
Password Is:

Set Serial ATA Port	---		[Enter]	Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
0 Password				seven characters long and include only letters or numbers (no symbols). Passwords
				are NOT case- sensitive. To cancel a password press the Enter key instead of enter-
				ing characters in the Enter New Password field and in the Re-enter New Password
				field. When a Serial ATA Port 0 Password is set it must be used to access the hard
				disk. Data on the hard disk cannot be read on other systems.

Set Primary	---		[Enter]	Not currently available.
Master Password

Password Entry on	■	Disabled	[Enabled]	When this is disabled, it is not necessary to enter the password before booting.The
Boot:	■	Enabled		hard disk is still password-protected without entering a password.