Fujitsu T4010 Security Chip Setting Submenu of the Security Menu, Exiting from the Security Menu

S e c u r i t y M e n u

Security Chip Setting Submenu of the Security Menu

The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.

		PhoenixBIOS Setup Utility
Main	Advanced	Security	Power Savings	Exit
	Security Chip Setting			Item Specific Help
Security Chip:		[Disabled]		Select Security Chip
				enabled or disabled.

* A reboot is required after exit to configure Security Chip correctly. Clear Security Chip becomes selectable after the reboot.

F1 Help	Select	Item	-/Space	Change	Values
ESC Exit	Select	Menu	Enter	Select	▲ Sub-Menu

Figure 16. Security Chip Setting Submenu

F9 Setup Defaults

F10 Save and Exit

Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu

Menu Field	Options		Default	Description
Security Chip:	•	Disabled	[Disabled]	Select to enable or disable the security chip. Note that after configuring the
	•	Enabled		security chip, a system reboot is required.

Exiting from the Security Menu

When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to another menu, use the cursor keys.

25