Fujitsu manual System configurator and order-information guide, PRIMERGY T850

A

System configurator and order-information guide

PRIMERGY T850 Status 2003-09-23

Rack Basic Unit (4U), 8-way

including 2x Xeon MP processor 2 system boards

upgradable to 8 CPUs

S26361-K846-V815	1,5 GHz / 1MB
S26361-K846-V819	1,9 GHz / 1MB
S26361-K846-V820	2,0 GHz / 2MB

Rack Basic Unit (4U), 4-way

including 2x Xeon MP processor 1 system board

upgradable to 4 CPUs

S26361-K846-V415	1,5 GHz / 1MB
S26361-K846-V419	1,9 GHz / 1MB
S26361-K846-V420	2,0 GHz / 2MB

16-way Upgrade

Requires two Rack Basic Units

fully equipped with 8 prcessors each. Only available after Special Release is granted.

For Windows 2000 Datacenter or VMware 1.5 only.

S26361-F2738-E316

The 16-way configuration is only available on request of an Special Release.

S26361-F2738-L308

Ugrade System Board

without processor

enables upgrade to 8 CPUs

max. 1x per system

If two system boards are installed, both have to be equipped with processors and memory

PRIMECENTER Rack

SNP:SY-F1647E301-P

Installation ex works for one server or subsystem.

Hereby the rack will be delivered completely pre-mounted and all wired connections are tested.

With racks 12U, 24U, 38U: Systems and components

will be delivered installed in the rack With racks 46U:

Systems and components will be delivered separately

To be ordered only together with

aPRIMERGY- PRIMECENTER rack e.g.: S26361-K826-V10x

refer configurator PC-Rack max. 1x per System

"Rack-mounting ex factory"

This service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the PRIMERGY racks. In case of the 46 U PRIMERGY Rack, this service has to be ordered,

to get the mounting kits and the cables installed.

B

Fujitsu Siemens Computers	6 of 18
Enterprise Products - PRIMERGY Server