Fujitsu TE988G user manual Connecting the monitor, Pin Signal

Fujitsu TE988G Color Monitor

Monitor Connection

To attach the monitor to your system, follow the steps as described below:

1.Turn off the monitor and computer.

2.Connect one end of the power cable to your monitor and the other end to the power outlet.

3.Connect the 15-pin D-Sub signal cable to the video adapter output on your personal computer.

4.Turn on the monitor and the computer. Wait about 30 seconds to adjust the picture with

the adjustment controls to obtain optimum picture.

5. If the signal cable is not connected to the PC, then the screen will display the Color Bar Pattern.

Figure 3 :Connecting the monitor

Pin Assignment

Pin	Signal	Pin	Signal
1	R	9	No Pin
2	G	10	Digital Ground
3	B	11	D-Sub Test
4	Ground	12	SDA
5	D-Sub Test	13	H-Sync
6	Video Return	14	V-Sync
7	Video Return	15	SCL
8	Video Return

5