74
- Memory Upgrade Module
Checking the Memory Capacity
Once you have changed the system memory capacity by replacing the installed module with a larger one,
be sure to check that your notebook has recognized the change.
Check the memory capacity by clicking [Start] -> Control Panel -> System and Maintenance -> System.
The amount of memory is displayed next to “Memory - RAM:”
Removing a Memory Upgrade Module
1Perform steps 1 through 4 of Installing a Memory
Upgrade Module.
2Pull the clips sideways away from each side of the
memory upgrade module at the same time.
3While holding the clips out, remove the module from the
slot by lifting it up and pulling it away from your notebook.
4Store the memory upgrade module in a static guarded
sleeve.
5Replace the cover and reinstall the screws.
Figure 30. Removing memory module
Memory Clips