PREPARATION FOR USE
CONNECTION
This section describes how to connect this TV to reception and other sources.
MAKE SURE YOU HAVE AN ANTENNA.
As DTV is only available over the air, you need an antenna to receive a digital signal.
NOTE:
• Be sure that antenna or cable is connected properly before plugging the power cord.
[ANTENNA CABLE CONNECTION]
1)When connecting TV to antenna
Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV.
2)When connecting TV to cable TV company (without box)
Connect the Coaxial cable on your home outlet to the ANT. IN jack of this TV.
VHF / UHF | Rear of this TV | |
antenna | ||
|
Coaxial cable
(commercially available)
or
Coaxial cable
Cable TV(commercially available) company
ANT. IN |
*Once connections are completed, turn on the TV and begin initial setup.
Channel scanning is necessary for the TV to memorize all available channels in your area. (Refer to “INITIAL SETTINGS” on page 12.)
NOTES:
•For your safety and to avoid damages to the unit, unplug the coaxial cable from the ANT. IN jack before moving the unit.
•If you use an antenna in order to receive analog TV, the same antenna generally will work for DTV reception. Outdoor or attic antennas will be more effective than
•To easily switch between antenna and cable wires, you can purchase an “Antenna Selector” commercially available.
•If you connect a cable system directly, contact the CATV installer.
[CONNECTION TO CABLE/SATELLITE BOX]
1)Connect the coaxial cable on your home outlet to the input jack of the CABLE/SATELLITE box.
2)Use the coaxial cable to connect the ANT. IN jack of this TV and the output jack of the CABLE/SATELLITE
box.
*Required cables in 2) and connecting methods differ depending on the CABLE/SATELLITE box. For more informa- tion, please contact the cable/satellite provider.
Satellite dish 
or
Cable TV company
Coaxial cable
(commercially available)
Rear of this TV
Cable box or
Satellite box
Coaxial cable | ANT. IN |
(commercially available)
8
EN
