FUNAI LC225SL9 owner manual 5Picture Adjustment

OPTIONAL SETTING

5Picture Adjustment

You can adjust brightness, contrast, color, tint and sharpness.

1Press [SETUP] to display the main menu.

2Use [Cursor K/L] to select “PICTURE”, then press [ENTER].

				Cursor s	Cursor B
Brightness				to decrease	to increase
Brightness	30
				brightness	brightness
Adjust		Move	ENTER Enter
Contrast				to decrease	to increase
Contrast	30
				contrast	contrast
Adjust		Move	ENTER Enter
Color				to decrease	to brighten
Color	30
				color	color
Adjust		Move	ENTER Enter
Tint
Tint		0		to add red	to add green
Adjust		Move	ENTER Enter
Sharpness
Sharpness		0		to make soft	to make clear
Adjust		Move	ENTER Enter

3Use [Cursor K/L] to select the item you want to adjust, then press [ENTER].

Picturei

Picture Mode	Dynamic
Brightness	30
Contrast	60
Color
	36
Tint
	0
Sharpness
	0
Reset Settings
Color Temp.	Neutral
Back Light
	0

Reset Settings

Use [Cursor K/L] to select “Reset”, then press [ENTER] to restore the “Picture Mode” settings to the default.

Reset Settingsi

	Cancel
This function resets the	Reset
"Dynamic" setting for Picture
Mode to factory default.

4Adjust the picture quality.

Picture Mode

Use [Cursor K/L] to select the desired setting, then press [ENTER]. (Standard, Dynamic, Movie and News)

Picturei

Picture Mode	Standard
Brightness	Dynamic
Contrast	Movie
Color	News
Tint
Sharpness
Reset Settings
Color Temp.
Back Light

Brightness, Contrast, Color, Tint, Sharpness

Use [Cursor s/B] to adjust.

Color Temp.

Use [Cursor K/L] to select the desired setting, then press [ENTER]. (Cool, Neutral and Warm)

Picturei

Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings	Cool
Color Temp.	Neutral
Back Light	Warm

Back Light

Use [Cursor s/B] to adjust the brightness of the backlight.

: To brighten

Back Light	0
Adjust	ENTER Enter

: To darken

5Press [SETUP] to exit.

22

EN

Note:

•To cancel picture adjustment, press [SETUP].

•When this unit is connected to PC or DVI devices, you cannot select “Sharpness”.